Capillary Thermometer, With Stainless Steel Case and Mounting Clamp
A durable, reliable, and very accurate Capillary Thermometer with 316 Stainless Steel Case, supplied complete with a Mounting Camp, for securing the face into a panel from behind (avoiding screws showing on the front)
These thermometers do not require any power, so are ideal for mounting in locations where power is not available, is not reliable, or is scarce. The Capillary is supplied permanently fitted to the gauge, and is run to an area where the temperature needs to be monitored, the Dial can then be mounted remotely on its bracket
The phial can be taped, tied, or glued to any surface, there is also a "Phial Pocket" available which can be screwed into a vessel so that the phial measures the temperature of the liquid around the Phial Pocket
Specification| Nominal Size | 60 mm, 80 mm, or 100 mm (Nominal) |
| Range | Temp Option A = -40°C to +40°C
Temp Option B = 0°C to +120°C
Temp Option C = 0°C to +350°C |
| Scales | °C Only (Black) for 0 to 120°C & 0 to +350°C ranges
°C Only (Red/Blue) for -40 to +40°C range |
| Case | 304 Stainless Steel |
| Capillary Material | Copper;
PVC Sheathed for -40 to +40°C & 0 to 120°C ranges
Copper Braided Sheath for 0 to +350°C |
| Capillary Length | 1500 mm |
| Bulb Material | Brass |
| Bulb Length | 25 mm |
| Bulb Diameter | 6.5 mm for 0 to 120°C & 0 to +350°C ranges
8.5 mm for -40 to +40°C range |
| OPTIONALPocket Material (Brass 50mm Pocket Supplied as standard) | Brass or Copper |
| OPTIONALPocket Length | 50 mm or 100 mm (Including Hex) |
| OPTIONALPocket Diameter (Internal) | 10 mm |
| OPTIONALPocket Diameter (External) | 12.5 mm |
| OPTIONALPocket Thread | BSPT (BSP Taper Male) |
| Window | Instrument Glass |
| Dial Legend | Stoved Enamel on Aluminium |
| Movement | Precision Bi-Metal Spiral |
| Accuracy | EC Class 2 (UNI EN 13190:2003); ±3.0% Full Range |
| Ingress Protection | IP 40 as per EN 60529 |
Also available FOR 0-120°c GAUGES ONLY (Shown Below) is a Brass, or Stainless Steel 304/316 Thermowell / Pocket. These can be useful if the bulb on the thermometer needs to enter pipework - the pocket is 50mm or 100mm long beyond the 1/2"BSP male thread, and these can be fitted through the branch in a 3/4" tee piece, these can be selected in the options below
