Goldstream AC Portable Gear Pumps for Fuel & Motor Oils 75 lpm, Cast Iron, Max 200 Celcius

Robust, and reliable Portable Gear Pumps for transferring oils between containers. We recommend this type of pump where liquid of medium to high viscosity needs to be pumped at high flow, and/or high temperature, it is one of the only pumps that will do this safely and effectively.

This High Flow Gear Pump has been designed to be chemically compatible with fluids such as Vegetable Oil, Animal Fats, Motor Oil, Waste Motor Oil, Lubricating Oils, and other medium to high viscosity oils and other non corrosive viscous substances, this does not include oils containing any water, or emulsified water. NOTE: if this pump is used to drain oil from the bottom of a vessel, and that oil contains settled water, the pump will rust solid during rest, if there is any possibiity of the oil tank containing water, then always run the pump through with dry oil after use.

• Featuring a sturdy carry handle, these pumps are well suited to portable usage
• Internal gears have bearings at both ends to ensure trouble free usage at high speed and under pressure
• Direction of flow can be changed easily by removing 2x 14mm Hex bolts, and rotating the pump head through 180 degrees
• Due to the motor being long-coupled to the pump head, this enables the pump to operate at up to 200 Celcius
• Shaft is exposed for efficient cooling, so precautions need to be taken as if it were any other piece of rotating machinery, to avoid material or persons being drawn in

IMPORTANT - Gear pumps cannot pump solid matter such as metal fragments, these will jam the gears and stop the pump, which can damage the motor or blow fuses. If you intend to use the pump for any oil with SOLID particle contamination, then you will need to install an inline filter to protect the pump, or be prepared to dismantle and unblock the pump as required. The pump can handle soft particles and will rapidly grind up soft particle matter such as food debris, fats, greases, etc. If you are likely to be pumping oil with solid particle contamination then we recommend using one of our Flexible Impeller Pumps which can handle very large solids without risking damage to the pumps impeller or motor, though flexible impeller pumps are not good for hot liquids, or pumping in high pressure or vacuum environments, in this scenario this gear pump is better.

Due to the pump being a positive displacement pump, and having no internal bypass mechanism, if the outlet flow is restricted to a point where the motor power is not sufficient to turn the gears (or is completely closed off), then the motor will stop turning completely, and will overheat, leading to a blown fuse. The maximum head for this pump, we recommend is 5m, unrestricted.

Motor is wired as standard as single-direction, however it is a bi-directional motor, if you wish, you can install a switch to reverse the polarity across the connections which will result in the motor running in the opposite direction. We sell 15A DPDT ON-ON switches HERE

Shown Below: Internal Gear Mechanism (One bearing removed to expose gear for photograph)

Shown Below: Replacement Pump Heads are also available, with or without Shaft Coupling & Spider:

Download Goldstream Gear Pump - Specifications PDF

Below, U.S.A. Wiring Colours. NOTE - BLACK is LIVE: