McCabe Gasoline Level Indicator Paste

GENUINE McCabe Gasoline Level Indicator Paste, Made in U.S.A.

Colour Change: From LIGHT BLUE To DARK BLUE

McCabe Gasoline Level Indicator Paste is a light sky blue colour and turns darker blue when immersed in light petroleum products.

Applied to a Dipping Tape and lowered to the bottom of a tank, the paste changes colour where it comes into contact with fuel, giving you a visual indication as to the depth of the fuel.

Some of the products that the gasoline paste is used to gauge are as follows:

• Gasoline
• Diesel
• Kerosene
• #2 Heating Oil
• Jet Fuel
• Naphtha
• Light Crude Oil
• Transmix
• Gasoline blended with Ethanol

Use:

1. Spread a smooth, even coat of the product on the bob or gauging device where you expect the air/product interface (ullage gauge) to be located.
2. Lower the bob or gauging device throguh the area where you expect the air/product interface to be located.
3. Leave immersed for approximately ten seconds and the paste will begin to turn dark blue.
4. When reading the results, note a straight, sharp demarcation on the gauging device, light blue above/dark blue below.

Storage / Lifespan:

• Keep the caps tight to avoid moisture contamination.
• Store between 50 – 85 degrees F.
• No production / expiry dates are printed on the products or packaging.
• Mccabe recommend a lifespan of 5 years if stored properly with lids securely tightened. Product can exceed this lifespan.

Screw Lid Jar, 3 Oz net / 120 Gram Gross

24 Jars per full box

McCabe Gasoline Level Indicator Paste Colour Change Shown Below

Mccabe Products are generally applied using a Dipping Tape;

... or IP M14 Water Finding Rule;

Download McCabe Gasoline Level Indicator Paste, MSDS PDF