Pedrollo PV Peripheral Pump

The design of this particularly compact brass pump offers an effective guarantee against the formation of rust and oxidation; as a result they are recommended for use in industrial applications such as cooling and conditioning.

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.

The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

2 Year Manufacturers Warranty

Wetted Components
Pump Body	Brass
Impellor Case	Brass
Impellor Case Seal	EPDM
Motor Shaft Seal	EPDM
Vanes	Not Present
Vane Springs	Not Present
Rotor / Gear / Impellor	Brass
Shaft Key / Nut	Stainless Steel EN 10088-3 1.4104
Motor Shaft	Stainless Steel EN 10088-3 1.4104
Bypass Valve Piston	Not Present
Bypass Valve Seal	Not Present
Bypass Valve Spring	Not Present

Performance
Voltage / Frequency	110v, 230v, 415v / 50Hz
kW	0.18
Amps
RPM	2900
Duty Cycle	Continuous
Cable Length	Not Present
Bypass Valve Y/N	N
Max Flow	10 lpm @ 5 m head
Discharge Pressure	5.5 Bar / 79.75 PSI
Max Suction Lift (Dry)	None
Max Suction Lift (Wet)	8 m
Inlet Fitting	Various, Consult PDF Below
Outlet Fitting	Various, Consult PDF Below
Max Particle Tolerance	100 Micron
Max Liquid Temp	90 Celcius
Min Liquid Temp
Max Room Temp	40 Celcius
Min Room Temp
Thermal Protection Y/N	Y
Max Liquid Viscosity	Water
Ingress Protection	IP44

Options Available
Single Phase 230v	Three Phase 415v	Pedrollo Part Number	kW (230v)	lpm	Head (m)
PVm 55		UK 41PNV55A1	0.18	0-10	42-5
	PV 55	UK 41PNV55A	0.18	0-10	42-5

For 110v 50Hz, and 60Hz motors please email us for availability and price.

Download Pedrollo PV, 50Hz PDF

Download Pedrollo PV, 60Hz PDF