Pedrollo TRITUS Submersible Grinder Pump For Sewage

Pedrollo TRITUS Submersible Grinder Pump for Sewage

The grinder pump of the TRITUS series, made of remarkably thick cast iron, exceptionally robust, abrasion-resistant and long lasting, is equipped with highly resistant and tempered stainless steel GRINDER. This allows for the total shredding of solids and fibers contained in wastewater and sewage in domestic and civil sectors, for the conveyance under pressure into the sewer system through small diameter pipes.

2 Year Manufacturers Warranty

Wetted Components
Pump Body	Cast Iron
Impellor Case	Cast Iron
Impellor Case Seal	NBR
Motor Shaft Seal	NBR
Vanes	Not Present
Vane Springs	Not Present
Rotor / Gear / Impellor / Grinder	TR 0.75 & TR 1.1 - Technopolymer // TR 1.5 & TR 2.2 Cast Stainless Steel 304
Shaft Key / Nut	Stainless Steel 304
Motor Shaft	Stainless Steel 304
Bypass Valve Piston	Not Present
Bypass Valve Spring	Not Present

Performance
Voltage / Frequency	50Hz or 60Hz
kW	0.75 - 2.2
Amps	Various, Consult PDF Below
RPM	2900
Duty Cycle	Continuous
Cable Length	10 m
Bypass Valve Y/N	N
Max Flow	Up to 220 lpm
Discharge Pressure	Up to 2.09 Bar
Max Suction Lift (Dry)	None
Max Suction Lift (Wet)	Submerged
Inlet Fitting	NA
Outlet Fitting	1.25" or 1.5" - See PDF
Max Particle Tolerance	TBC
Max Liquid Temp	+40 C
Min Liquid Temp
Max Room Temp
Min Room Temp
Thermal Protection Y/N	Y
Ingress Protection	IPX8

Options Available
Model (Single Phase)	Model (Three Phase)	Cable Length	kW	lpm	Head (m)
TRm 0.75	TR 0.75	10m	0.75	125 - 20	2 - 15
TRm 0.9	TR 0.9	10m	0.9	170 - 20	2 - 15
TRm 1.1	TR 1.1	10m	1.1	140 - 20	2 - 21.5
TRm 1.3	TR 1.3	10m	1.3	220 - 20	2 - 22.5
TRm 1.5	TR 1.5	10m	1.5	270 - 20	2 - 25
	TR 2.2	10m	2.2	280 - 20	2 - 30
TRm 2.2 AP	TR 2.2 AP	10m	2.2	275 - 20	2 - 35
	TR 3 AP	10m	3	305 - 20	2 - 42.5

Download Pedrollo Tritus, 50Hz PDF

Download Pedrollo Tritus, 60Hz PDF