Pentek, Pentair CBR2 Filter Elements
Designed to reduce lead, cyst, MTBE and certain VOC as well as reducing chlorine, taste and odour.
The CBR2-10 is maunufactured from a combination of powderd activated carbon and a specially designed absorbant media for lead and mercury reduction. Being a 0.5 micron nominally rated cartridge, pre-filtration is recommended to extend the life of the filter by avoiding premature plugging of the neck.
Pentair Pentek CBR2-10 and CBR2-10R Cartridges are advanced multi-media cartridges designed to reduce chlorine taste & odor and other contaminants.
CBR2 Series Cartridges are manufactured using a powdered activated carbon (PAC) with a specially designed adsorbent media.
These cartridges are protected by a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.
As with our standard Pentek CBC Series Carbon Block, both the CBR2-10 and CBR2-10R are effective at reducing levels of chlorine taste & odor and other contaminants.*
The CBR2-10R has a built-in flow restrictor (0.6 gpm) to allow for maximum contact time.
- Reduces particles as small as 0.5 micron in size by mechanical means
- Premium high-capacity chlorine taste & odor reduction exceeding 20,000 gallons
Technical Information| Product Code | Micron | Lead Reduction (litres) | Flow (lpm) | Initial (bar) | Length (Inches) |
| CBR2-10-Black | 0.5 | 7,500 | 3.8 | 1.0 | 9 1/4 |
| CBR2-10 | 0.5 | 7,500 | 3.8 | 1.0 | 9 1/4 |
When replacing elements in filter housings with screw-on bowls we always recommend the use of Silicon O Ring Grease to aid tightening of the bowl, preventing pinching & scuffing and thus prolonging the life of the O Ring
Download Pentair CBR2 - Specifications PDF
