Technoton DFM Digital LCD Fuel Meter, for Engine Fuel Consumption
PRICES ARE SUBJECT TO AN ADDITIONAL 35% SURCHARGE FOR UK GOV ADDITONAL RATE DUTY ON GOODS FROM RUSSIA OR BELARUS.
Excellent quality, Digital, Engine Fuel Consumption Meters, for monitoring engine fuel usage. Some models (-C Models, consult chart below) are complete with an engine hours total, which accumulates on the basis that the engine is running whilst fuel is passing through the meter, these meters are also supplied with a magnetic key which allows the user to switch between the screens without there having to be a tactile switch
Suitable for all fuel oils, providing the fuel is clean, can be used with;
- Diesel
- Petrol
- Kerosene
- Heating Oil
- Other Petroleum Deriviates
- Biodiesel
- Vegetable Oil
- Fuel Blends
- Fuel Substitutes
Powered by the vehicles power supply (battery), suitable for 12vDC or 24vDC systems, with a voltage tolerance of 10 to 50 vDC
OPTIONAL FITTING KIT: An adaptor kit is available which has fittings to enable connection to 3/8"BSP Male, 3/8"BSP Female, 10mm Tube Compression, and 3/8" (9.53mm) Hose Barb (All in the one kit)
4 Models available to suit different engine fuel consumption rates, referring to your vehicle manual should give some indication as to the likely flow range required
General Specification| Operating Temperatures | -20 to +80 °c |
| Voltage | 10-50 vDC, Protected up to 100v |
| Current Consumption | 50ma @ 12vDC, 25ma @ 24vDC |
| IP Rating | IP 54 |
| Output Signal | None |
| Min / Max Kinematic Viscosity | 1.5-6.0 mm2/Sec / Centistokes |
| Nominal / Max Pressure | 2 to 25 Bar |
| Max Particle Tolerance | 80 Micron |
| Fitting Size | Consult Chart Below |
Models Available| | Flow Range | Starting Flow | Connection Thread | Accuracy within flow range | With "Engine Hours" Display Y/N |
| DFM 50C | 1 - 50 LPH | 0.5 LPH | M14x1.5 | ±1% | Y |
| DFM 100B | 2 - 100 LPH | 0.5 LPH | M14x1.5 | ±1% | N |
| DFM 100C | 2 - 100 LPH | 0.5 LPH | M14x1.5 | ±1% | Y |
| DFM 250B | 5 - 250 LPH | 2.0 LPH | M14x1.5 | ±1% | N |
| DFM 250C | 5 - 250 LPH | 2.0 LPH | M14x1.5 | ±1% | Y |
| DFM 500C | 10 - 500 LPH | 5.0 LPH | M16x1.5 | ±1% | Y |
Shown Below, Digital Display, being switched between display screens using supplied magnetic key
Shown Below, Installation Diagram, Meter Fitted Before Pump (Less Accurate)
Shown Below, Installation Diagram, Meter After Pump (More Accurate)
Shown Below, Optional Fitting Kit. Each DFM Fitting kit contains 2 of EACH item shown below:
Download Technoton DFM Operation Manual (All Models) PDF
