ZVA Slimline GBZ, Automatic Chemical Nozzle (60 lpm), ATEX Approved
Zinc-Free Bronze Body, Stainless Spout, FEP (PTFE) Seals.
Popular for use with alcoholic spirit as it is available with a curved spout with depth stop for the filling of barrels, such as Brandy, Whisky, Cognac etc.
Suitable only for wet hose delivery, not for gravity flow.
- Patented venturi type automatic shut-off with safety cut-out attitude valve.
- Built-in check valve
- 3-speed lever latch with removeable latch pin EB 280
Suitable For;
- Aliphatic Hydrocarbons: Petrol/Gasoline, Diesel, Jet Fuels, Diesel, Fuel Oils, Kerosene
- Aromatic Hydrocarbons: Benzene, Toluene, Xylol
- Chlorinated Hydrocarbons: Trichloroethylene, Perchloroethylene, Carbon Tetrachloride
- Methylene Chloride
- Cohols, Commercial: Ethyl, Butyl, Isopropyl, Methyl Alcohol, Methanol, M100, Ethanol
- Liquid Foodstuffs: Spirits, Drinking Water
- Ester, Acetates, Ether: Acetic Ester, Ethyl Acetate, Butyl Acetate, Ethyl Ether, Dimethyl Ether, Amines
- Ketones, Aldehydes: Acetone, Anone, Methyl Ethyl Ketone, Acet/Benz/Formaldehyde
- Glycols, Glycerine, Glysantin, Defrosting Fluids, Anti-Freezing Fluids containing Water
- Water, Anorganic Salt Solutions, Weak Alkalis, Weak Acids
Nozzles supplied will be ZVA 'Slimline 2', the replacement for the original ZVA Slimline, the only difference between the two models being the hand grip pattern. Actual picture shown above is of the ZVA Slimline 2
An automatic shut-off nozzle can only be used on pumped dispensing systems, they will not work on gravity-fed dispensing systems
Approved for use in ATEX areas - SIRA Certificate Number 03ATEX9487U, Category - Ex II 1 G
There are various options available for ZVA Slimline Nozzles, these include a choice of Guard, and Spout patterns. Most of the time a Standard Guard (Guard No 4) and Spout (Spout Length 185 mm) are used, however for existing installations where the dispensing pump system has been designed to accept a specific (or older) style of Guard or Spout, then the correct style can be selected to ensure compatibility with the Nozzle Holster
PLEASE NOTE THAT DUE TO NOZZLES BEING MADE TO ORDER, THERE IS A 30.00 GBP CHARGE FOR NOZZLES ORDERED INCORRECTLY THAT NEED TO BE RE-WORKED
Specification| Inlet | Various, Consult Chart |
| Spout Diameter | 24.5 mm |
| Trigger Catch | Yes, 3 Position |
| Swivel Included | Yes |
| Min Flow rate | 0 lpm |
| Max Flow rate | 60 lpm |
| Min Back Pressure | 7 PSI / 0.5 Bar |
| Max Back Pressure | 50 PSI / 3.5 Bar |
| Weight | 1.8 Kg |
Wetted Components| Body | Zinc-Free Bronze |
| Seals | FEP (PTFE) Coated Viton |
| Spring | Stainless Steel |
| Main Stem | Stainless Steel |
| Valve Seat | Acetyl Resin (Delrin) |
| Diaphragm | PTFE |
| Swivel | Stainless Steel |
| Lever | Rilsan Coated Steel |
| Guard Style | Spout Style | Inlet Type | Hose Connection | Spout Length | Spout Material | Boot Colour | Part Number |
| EG281.1 | ER242.1 VA | Swivel | 1"BSP Male | 185 mm | Stainless Steel | Black | ZVA 1.0 GBZ |
| EG281.1 | ER242.1 VA | Swivel | 1"BSP Female | 185 mm | Stainless Steel | Black | ZVA 1.1 GBZ |
| EG281.1 | ER242 C | Swivel | 1"BSP Male | C-Spout, Length TBC | Stainless Steel | Black | ZVA 1.0 GBZ-C |
| EG281.1 | ER242 C | Swivel | 1"BSP Female | C-Spout, Length TBC | Stainless Steel | Black | ZVA 1.1 GBZ-C |
Other guard styles available upon request:
| Splash Guards | Material | Part Number |
| Splash Guard - GREEN (Petrol Only) | PVC | ZVA SGG |
| Splash Guard - BLACK (Diesel Only) | PVC | ZVA SGB |
| Splash Guard - RED (Diesel Only) | PVC | ZVA SGR |
| Splash Guard - YELLOW (Diesel Only) | PVC | ZVA SGY |
| Alternative Colour Boots for Diesel Nozzles | Material | Part Number |
| Boot - RED | PVC | ZVA EK 144 R |
| Boot - YELLOW | PVC | ZVA EK 144 Y |
| Boot - BLUE | PVC | ZVA EK 144 BU |
Download ZVA RG - Datasheet PDF
