Atkinson Tanktop, Top Offtake, Anti-Siphon System For Heating Oil Tanks
Finally the end is in sight for environmentally threatening bottom off-take heating oil tanks, with the availability of the Atkinson Tanktop, the Worlds First comprehensive top-offtake system
The most simple fitting of all tank equipment, drop the Tanktop through a 25mm hole and fasten down with self tapping screws, the floating suction tube drops through and floats in the oil inside the tank, this means the cleanest of the oil is always drawn off first, leaving the muck that has settled in the bottom of the oil tank. The Valve then terminates with a 10mm hydraulic adaptor, into which you simply plug your Copper pipe (For in-bund use only, for use on a single skin tank the fitting should be replaced with a brass Comperssion Fitting).
- Diaphragm Anti-Siphon Valve, Pre Set @1.0 S.G +20mb-0mb (2m head)
- Anti Spill Valve
- Non Return Valve
- Self Isolating
- 52 Micron Nylon Filter
- Flexible Suction Tube
- Priming Button
- Aluminium Float
- Viton Seals, Balls, & Diaphragms Throughout
- Bio Fuel compatible
- Waterproof
- 10mm Hydraulic Push Fit Adaptor
- MADE IN ENGLAND!
Technical Specification| Maximum Negative Head | Subject to factory setting, for example 200 mb = 2 m Negative Head |
| Maximum Vacuum | -1 Bar / -14.5 PSI |
| Tank Fitting | TTV-01 > 1"BSPP male thread, requiring a 1"BSP female thread, or 32mm hole & backnut.
TTV-01-C > Self tapping screws, requiring 25mmID hole. |
| Outlet Fitting | 1/4" BSP Parallel Female |
| Height | 105 mm |
| Diameter | 82 mm |
| Suitable For | ASTM D3699 1-K Kerosene or ASTM D396 No.1 or No.2 Fuel Oil |
| Packaged Dimensions | 26 x 26 x 14 cm, Wt 1.4 Kg. |
