Fuel Sampling Bucket, Stainless Steel with Bottom Band, Fitted With Grounding Cable and ATEX Clip. 10L, 12L and 15L

• High quality, strong & durable
• Made of 18/10 (304) stainless steel, 100% rust-free
• One-piece construction, no seams or welds to harbour bacteria or split
• Flat handle will not cut into your hand when bucket is heavy
• Base measures 8” diameter on all sizes
• Bottom band lifts the cold or warm surface off the floor and creates a "grab-hold" for tipping, it also gives weight to the base to prevent toppling
• Will not distort if water freezes inside
• Lids are available for every size (all subject to MOQ and must be ordered with buckets
• Available in 10, 12, and 15 litre capacities (15 litre subject to MOQ)
• Stamped graduations inside the bucket every 1 Litre, figured at 5 and 10 Litre - INDICATIVE ONLY, MARKINGS MAY BE OUT BY ±20%.
• Fitted with 1m Stainless Steel Static Bonding Cable and Alptec SC-01 20mm ATEX Approved Clamp.
• Available without the bonding assembly if required, HERE

Shown Below; 1m Stainless Steel Static Bonding Cable and Alptec SC-01 20mm ATEX Approved Clamp.

Shown Below: Optional Bucket Lids