Fuel Sampling Bucket, Stainless Steel with Bottom Band, Fitted With Grounding Cable and RACO Clip.

• High quality, strong & durable
• Made of 18/10 (304) stainless steel, 100% rust-free
• One-piece construction, no seams or welds to harbour bacteria or split
• Flat handle will not cut into your hand when bucket is heavy
• Base measures 8” diameter on all sizes
• Bottom band lifts the cold or warm surface off the floor and creates a "grab-hold" for tipping, it also gives weight to the base to prevent toppling
• Will not distort if water freezes inside
• Lids are available for every size (all subject to MOQ and must be ordered with buckets
• Available in 10, 12, and 15 litre capacities (15 litre subject to MOQ)
• Stamped graduations inside the bucket every 1 Litre, figured at 5 and 10 Litre - INDICATIVE ONLY, MARKINGS MAY BE OUT BY ±20%.
• Fitted with 1m of static bonding cable and quality 'RACO' earthing clamp
• Available without the bonding assembly if required, HERE

About Our Unique Grounding Cables...

• Manufactured by Oilybits in our U.K. production facility.
• Polyolefin yellow/green stripe, heat shrink cable sheath - the correct colour for earthing applications and fully resistant to Oils, unlike PVC.
• 6mm2 tinned copper, braided cable for greater resistance to acidic / oxidised oils.
• 1m length of cable.
• Cable end terminals are fused with solder to prevent fraying, loosening, and contamination / corrosion of the cable, thereby ensuring a stable ground connection.
• RACO, cast brass, 70mm grounding clip, with red handles.
• 304 stainless steel nuts and bolts throughout, featuring Nyloc Nuts or Shake-proof Washers to prevent loosening, thereby ensuring a stable ground connection.
• Nylon inner seal on vessel bolt, to prevent leakage of contents above the terminal. Oil resistant.
• A superior product to that of our competition.

Shown Below; Grounding Cable, featuring soldered terminal end & nylon bolt seal.

 

Shown Below: Optional Bucket Lids

Download RACO Clip, Drawing PDF