Pedrollo Steadypres Inverter With Water Passage
Steradypres is an electronic device that manages and controls both surface and submersible pumps using inverter technology. Steadypres It is designed for water supply in homes, busi- nesses, and for irrigation purposes. Suitable for all kinds of pressurization systems, including existing ones, Steadypres enhances comfort, extends the system's lifespan, and significantly reduces energy consumption.
Product Desciption
Steadypres is connected to the pump's delivery system and regulates the motor's rotation speed by adjusting the voltage and frequency of the output, in response to water flow demand, ensuring constant pressure within the system.
Steadypres components:
- electronic frequency converter (inverter);
- pressure and flow sensor;
- user interface with keypad and display to facilitate setting and reading operations;
- integrated and inspectable non-return valve.
Steadypres features include:
- A display and keypad for easy, step-by-step setup of oper- ating parameters with two levels of adjustment:
- BASIC, for setting pressure and current;
- ADVANCED, for customizing the inverter for specific sys- tem needs.
- Internal electronic components are cooled as water flows through the device, helping to dissipate heat.
Steadypres protects the pump from:
- Dry running
- Overcurrents
- Overvoltage
- Undervoltage
- Overheating
- Short circuit
- Phase failure in connections (for TT version)
Key Features
- Easy installation, adjustment and setting.
- Energy saving due to lower absorption of the pump.
- Control of hydraulic and electrical operating parameters and protection against faults.
- Reduced noise operation.
- Longer pump life.
Optional A Richiesta
Expansion board, which allows:
- RS485 communication to link up to three Steadypres inverters and create pumping groups;
- alternating pump operation;
- configuration of a dry input contact (e.g. float, double set point);
- configuration of a dry output contact (e.g. alarm)
Wetted Components| Pump Body | Cast Iron (Painted) |
| Impellor Case | Cast Iron (Painted) |
| Impellor Case Seal | NBR |
| Motor Shaft Seal | NBR |
| Vanes | Not Present |
| Vane Springs | Not Present |
| Rotor / Gear / Impellor | Brass |
| Shaft Key / Nut | 304 Stainless Steel |
| Motor Shaft | 304 Stainless Steel |
| Bypass Valve Piston | Not Present |
| Bypass Valve Seal | Not Present |
| Bypass Valve Spring | Not Present |
Performance| Voltage / Frequency | 110v, 230v, 415v / 50Hz |
| kW | 0.37-2.2 |
| Amps | |
| RPM | 2900 |
| Duty Cycle | Continuous |
| Cable Length | Not Present |
| Bypass Valve Y/N | N |
| Max Flow | 40 lpm @ 5 m head |
| Discharge Pressure | 9.0 Bar / 130.5 PSI |
| Max Suction Lift (Dry) | None |
| Max Suction Lift (Wet) | 8 m |
| Inlet Fitting | Various, Consult PDF Below |
| Outlet Fitting | Various, Consult PDF Below |
| Max Particle Tolerance | 100 Micron |
| Max Liquid Temp | 90 Celcius |
| Min Liquid Temp | |
| Max Room Temp | 40 Celcius |
| Min Room Temp | |
| Thermal Protection Y/N | Y |
| Max Liquid Viscosity | Water |
| Ingress Protection | IP44 |
For 110v 50Hz, and 60Hz motors please email us for availability and price.
Download Pedrollo Catalogue 50Hz PDF
Download Pedrollo Catalogue 60Hz PDF