Protego LDA-F Liquid Detonation Flame Arrester

PLEASE EMAIL US FOR PRICES

For Filling and Drain Lines - Internal Installation

Explosion Group: IIA1, D /IIA, C / IIB1, C / IIB2, C / IIB3

• Siphon protection offers increased safety
• Low risk of contamination
• Low pressure loss provides protection against deflagrations and stable detonations
• Useable for nearly all flammable liquids
• Meets TRGS* requirements
• Available with different connections

* TRGS = technical regulations for hazardous substances

Function and Description

The PROTEGO LDA-F series of liquid detonation arresters was developed for storage tanks filling and drain lines that are not continuously filled with product and sometimes contain a combustible mixture. The integrated siphon protection (1) with PROTEGO flame arrester unit (2) additionally prevents the liquid, in which the lines are immersed, from being siphoned off while the container is being drained. The PROTEGO flame arrester unit consists of several FLAMEFILTER discs (3) and spacers firmly held in a FLAMEFILTER casing (4). The number of FLAMEFILTER discs and their gap size depends on the arrester’s intended use.

The device is installed inside the container at the end of the line and prevents the combustion from being transferred into the tank if the explosive atmosphere ignites. The PROTEGO LDA-F series of liquid detonation arresters combine the classic PROTEGO flame arrester design with the siphon principle in which the liquid product serves as a barrier to flame propagation.

When a highly accelerated pipe deflagration or detonation occurs, the combustion pressure and flame propagation speed are substantially reduced by the design, converted into a low-energy deflagration, and then stopped by the remaining immersion liquid and the PROTEGO flame arrester.

The application limits for the device is product vapor/air mixture temperatures up to +60°C / 140°F and an absolute pressure up to 1.1 bar / 15.9 psi. This covers all possible operating conditions of empty lines for flammable liquids. The liquid detonation arrester in standard design is pressure resistant up to 10 bar / 145 psi. The device protects against nearly all flammable liquids and is approved for explosion groups IIA to IIB3 (NEC group D and C MESG ≥ 0.65 mm). EU conformity according to the currently valid ATEX directive. Approvals according to other national/international regulations on request.

 Dimensions in mm / inches.

The FLAMEFILTER is also available in the materials Tantalum, Inconel and Copper etc.

Special materials upon request.

Special approvals upon request.

Higher operating temperatures upon request.

 Other connections upon request.

Other types upon request.