Tigerholm, Tigerloop Orignal Bio, Internal Fitting De-Aerator

For internal or external mounting

The Tigerloop Original 'Bio' is a true internal fitting de-aerator which vents air into the outside atmosphere. Previously the GOK GS2000 PRo-Fi3 has been the device of choice for internal installations, however it is not a true de-aerator, only breaking air bubbles down into smaller particles and putting them back through the burner. There are advantages and disadvantages with either though... If the installtion is new, then we recommend the Tigerloop Bio is fitted, this also requires the need for a 10mm copper air venting tube to outside. If the installation is existing, and it is not practical to install an air venting tube, then the GOK GS2000 Pro-Fi3 should be used

A Tigerloop makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost effectiveness and reliability

Effective de-aeration
In an oil heating system using a Tigerloop, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system. This eliminates oil pump and nozzle problems associated with gas/air in the oil

On two-pipe circulation
An oil pump delivers the same amount of oil irrespective of what is actually needed for combustion. In the case of a normal domestic burner, only 5 % of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank. With a Tigerloop automatic oil de-aerator no oil needs to be transported back to the tank. The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason only the amount of oil to be burned in combustion is sucked from the oil tank.

Preheated oil
A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.

Minimum of dirt/sludge
The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot build up is reduced and filter life is extended.

Download Tigerloop Brochure PDF

Download Tigerloop Bio Installation Manual PDF